Hurricane Clips Premium Heavy Duty Carbon steel for securing Plywood

Description

New
Improved
design allows the clips to fit on thinner plywood 5/16", 3/8", 7/16", 1/2".
• Premium Heavy Duty Hurricane Clips for use securing Plywood Hurricane shutters
• EASY to install & remove - Simply install clips and push. NO screws, nails, brackets or bolts that permanently damage your property
• HOLDS plywood in window casing to protect windows during high wind events
• LASTING - Store in a dry place and re-use every hurricane season.
Installing the Clips
• Place the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed).
- Each clip should be placed on the edge of the plywood cover no more than 24 inches apart.
- Make sure the tension legs are facing towards you.
• Push the plywood covers with the clip tension legs to the outside firmly into the casing.
• Clips work as well in round windows as they do in rectangular windows. You can adjust the number of clips used to account for different shapes and sizes of windows.
Removal of Boards with Clips
• Press in on the plywood.
• Put you finger behind the tension leg and pull the tension leg towards you. Work with the clips on one side of the plywood sheet. (A screwdriver can help)
• As the tension legs are pulled away from the brick the plywood sheet comes right out. Carefully remove the plywood sheet from the window. For large sheets of plywood you may need a helper.
• Remove clips from plywood and store in a dry place.
• Store the plywood for re-use.